Laser Cutting Machine
Home / Products / Laser Cutting Machine / Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

PARAMETER

Plate And Tube Fiber Laser Cutting Machine Enclosed

Plate And Tube Fiber Laser Cutting Machine Enclosed

The laser cutting machine is a laser that is emitted from a laser and is focused into a high power density laser beam through an optical circuit system. The laser beam irradiates the surface of the workpiece, causing the workpiece to reach the melting or boiling point, while a high-pressure gas coaxial with the beam blows away the molten or vaporised metal.
As the beam moves relative to the position of the workpiece, it eventually creates a slit in the material, which results in a cut.
Laser cutting process is an invisible beam instead of the traditional mechanical knife, with high precision, fast cutting, not limited to the cutting pattern limitations, automatic layout to save materials, smooth kerf, low processing costs, etc., will gradually improve or replace in the traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the workpiece, and will not cause scratches on the surface of the workpiece during the work; the laser cutting speed is fast, the kerf is smooth and even, and generally does not require subsequent processing; the cutting heat-affected zone is small, the plate deformation is small, and the cutting slit is narrow (0.1mm~0.3mm); there is no mechanical stress on the kerf, and there is no shear burr; the processing precision is high, and the repeatability is good, and it does not damage the surface of the material; the numerical control programming, it can process Arbitrary planogram, can cut the whole plate with a large width, no need to open the mould, economic and time-saving.

Plate And Tube Fiber Laser Cutting Machine Enclosed

Independently developed cutting head

Independently developed operating system

Intelligent number chuck

Core technology

Plate And Tube Fiber Laser Cutting Machine Enclosed

Plate And Tube Fiber Laser Cutting Machine EnclosedPlate And Tube Fiber Laser Cutting Machine Enclosed

 

Product ModelXSM-3015-HG-220-6MXSM-6015-HG-220-6MXSM-4020-HG-220-6MXSM-6020-HG-220-6M
Working Area3000*1500mm6000*1500mm4000*2000mm6000*2000mm
Laser Power6000W,8000W,10000W,12000W,15000W,20000W
Positioning Accuracy+-0.03mm/m
Repeated Positioning Accuracy+-0.02mm
Voltage380VAC+-10%/50Hz
Cutting Pipe PerformanceXSM-3015GTXSM-6015GTXSM-4020GTXSM-6020GT
Maximum Moving Speed120m/min
Maximum Cutting Speed60m/min
Drive SystemHigh precision gear and rack+high precision linear guide rail
Plate Cutting PerformanceXSM-3015GT XSM-6015GTXSM-4020GTXSM-6020GT
Pipe DimensionCircular tube 20-200mm/Square tube 20*20mm-150*150mm
Processing Tube TypeRound tubes,rectangular tubes,eliptical tubes,U tubes etc.
Maximum Pipe Length3000-15000mm
Fast Moving Speed30m/min
Rotational Speed150r/min
Drive SystemHigh precision gear and rack+high precision linear guide rail

 

Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Laser Head Brand

The best cutting effect of different thickness metals can be achieved by adjusting the focus automatically in the cutting process

Laser Cutting System CypCut

It is stable and reliable,easy,to deploy,easy to debug,safe in production,rich in function and excellent in performance

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine EnclosedExchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed
Brand Rack And PinionImported Linear GuideJapan Imported Reducer

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine EnclosedExchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed
Steel Sheet BedImported Servo MotorBrand Laser Source

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed

Exchange Table Plate And Tube Fiber Laser Cutting Machine Enclosed
Industrial ChillerLaser Generator

Plate And Tube Fiber Laser Cutting Machine Enclosed

1. Strong ventilation system,environmental protection and no pollution.

2. The worktable is driven by double motors,with stable exchange and high speed;

    The slag cleaning table is more convenient and independent without mutual influence.

3. Fully protected closed design.

Plate And Tube Fiber Laser Cutting Machine Enclosed

Plate And Tube Fiber Laser Cutting Machine EnclosedPlate And Tube Fiber Laser Cutting Machine EnclosedPlate And Tube Fiber Laser Cutting Machine EnclosedPlate And Tube Fiber Laser Cutting Machine EnclosedPlate And Tube Fiber Laser Cutting Machine Enclosed

Plate And Tube Fiber Laser Cutting Machine EnclosedAHXISIM Laser

Anhui Hisman Intelligent Equipment Manufacturing Co., Ltd. was established in 2013. It is a national high-tech enterprise that integrates the research and development, production, and sales of metal forming intelligent equipment, committed to providing metal forming intelligent equipment solutions for global users.

 

Plate And Tube Fiber Laser Cutting Machine EnclosedTechnology Study

AHXISIM Laser has a professional independent core R&D team, accounting for over 12% of the company's total employees. The company has established long-term cooperative relationships with multiple universities and conducts talent cultivation. The company relies on mature software development and controller development advantages, comprehensively mastering core technologies such as CNC systems, precision cutting heads, and high-speed transmission systems. The equipment processes products with higher accuracy, smoother cutting edges, faster speed, and higher production capacity.

 

Plate And Tube Fiber Laser Cutting Machine EnclosedCustomer Service

AHXISIM laser rapid response customer service team accounts for over 20% of the company's total employees, including professional teams such as pre-sales service, sales service, after-sales service, customer training, etc., covering technical process consulting, visits and incoming material reception, customer on-site visit planning, and installation and debugging. Provide free training for customer personnel, equipment maintenance and repair, and provide a comprehensive and fast response service of 7*24 hours.

Plate And Tube Fiber Laser Cutting Machine EnclosedFree Training

To ensure that customers can use their devices efficiently and safely, AHXISIM Laser will provide free and complete equipment operation training. Before using the equipment, the customer needs to dispatch the equipment operator to the AHXISIM laser training center to receive standardized training that matches the purchased model. Finally, after strict system theoretical assessment and on-site practical operation assessment, a certificate will be issued after passing the assessment, and the employee will be certified to work, effectively ensuring the safety of the equipment and operators.

Plate And Tube Fiber Laser Cutting Machine Enclosed



Related Products

Enclosed Metal Sheet Fiber Laser Cutting Machine Enclosed Metal Sheet Fiber Laser Cutting Machine
Constructed with a robust frame and enclosed housing, the Enclosed Fiber Laser Cutting Machine ensures operator safety by containing the laser cutting process within a secure enclosure. This design minimizes the risk of exposure to the laser beam and helps manage fumes or debris produced during the cutting operation.
Metal Fiber Laser Cutting Machine Metal Fiber Laser Cutting Machine
Fiber laser cutting machine is an automated metal cutting system that uses a CNC controller to drive a laser beam along a tool path generated by CAD/CAM software to achieve a fine precision cutting tool for metal processing drawings. sheet metal and tubing, and can cut flat and beveled metal shapes and profiles.
Single Table Plate And Tube Fiber Laser Cutting Machine Single Table Plate And Tube Fiber Laser Cutting Machine
Table Top Fiber Laser Cutting Machine is characterized by its compact and space-saving design. This machine is suitable for smaller workspaces or workshops where floor space is limited.
Anhui Hisman Intelligent Equipment Manufacture Co., Ltd.

Anhui Hisman Intelligent Equipment Manufacture Co., Ltd. is located in A-8#,Dahe Industrial Park,Bowang Town, Bowang District,Maanshan City,Anhui Provence,China.

Contact Us

    Tel: +86 0555 6776 471

    Email: tim@ahhisman.com

    Fax: +86 0555 6765 075

    Phone: +86 138 5551 1880

    Add: A-8#, Dahe Industrial Park, Bowang Town, Bowang District, Maanshan City, Anhui Province, China

INQUIRY

Copyright © Anhui Hisman Intelligent Equipment Manufacture Co., Ltd. All Rights Reserved | Sitemap | Powered by Reanod

Wechat
Wechat