Press Brake
Home / Products / Press Brake / Single Cylinder Series 120KN 600mm Full Electric Press Brake

Single Cylinder Series 120KN 600mm Full Electric Press Brake

Fast running speed


The response speed of the servo motor of the all electric servo bending machine is faster than that of the hydraulic servo. Taking the 1000KN 3100mm all electric servo bending machine as an example, the slider return and fast down speed can reach 140mm/s, and the working speed is 0-50mm/s; However, the majority of hydraulic servo bending machines of the same tonnage have slider return and fast down speeds below 120mm/s, with a working speed of only 10mm/s. Hydraulic servo bending machines are prone to malfunctions due to environmental and hydraulic system heating effects, requiring start-up preheating or shutdown for heat dissipation. However, fully electric servo bending machines have fewer components and a low failure rate, fundamentally eliminating these issues.


The machining efficiency of a fully electric servo bending machine with the same tonnage is nearly twice that of a hydraulic servo bending machine. Taking the 1000KN 3100mm bending machine as an example, after testing, it was found that the fastest bending speed of the fully electric servo bending machine can be 34 times/minute (opening height of 10mm), and the slowest can be 29 times/minute (opening height of 140mm), greatly improving production efficiency. Taking the 140mm stroke as an example, the fully electric servo bending speed is 29 times per minute, while the hydraulic servo bending speed is only 12 times per minute; Taking the 10mm stroke as an example, the fully electric servo bending speed is 34 times per minute, while the hydraulic servo bending speed is 21 times per minute.


Single Cylinder Series 120KN 600mm Full Electric Press Brake

PARAMETER

Single Cylinder Series 120KN 600mm Full Electric Press Brake

Single Cylinder Series 120KN 600mm Full Electric Press Brake

Single Cylinder Series 120KN 600mm Full Electric Press Brake

Single Cylinder Series 120KN 600mm Full Electric Press Brake

Four major advantages

energy conservation

One month's electricity consumption is 1/4 of that of a regular hydraulic bending machine

environment protection

No hydraulic oil is used, so there is no oil leakage, making the workshop cleaner, tidier, and more environmentally friendly

Efficient

By using servo motors and screw control, the efficiency of the entire cycle is doubled compared to that of hydraulic bending machines

Accurate

By using servo motors and high-precision screw rotation, the slider can slide up and down, and the positioning accuracy can still be maintained for long-term operation

Technical parameters of the horizontal bar series

XSM12-06
Pressure Capacity (T)12
Processing Length (mm)600
Bending Stroke (mm)120
Rear Material Blocking Stroke (mm)200
Number Of Axes3
Spindle Power (kw)5.5
Quick Return Speed (mm/s)200
Working Speed (mm/s)Less than 30
Opening Height (mm)420
Throat Depth (mm)200
Column Spacing (mm)520

March 2024 AHXISIM in Shenzhen,China


Related Products

Electro-hydraulic CNC Sheet Metal Press Brake Electro-hydraulic CNC Sheet Metal Press Brake
Hydraulic sheet metal press brakes are versatile machines designed to bend and form sheet metal with superior precision and control. They utilize hydraulic pressure to apply pressure, allowing operators to easily achieve precise bends, folds and shapes.
Anhui Hisman Intelligent Equipment Manufacture Co., Ltd.

Anhui Hisman Intelligent Equipment Manufacture Co., Ltd. is located in A-8#,Dahe Industrial Park,Bowang Town, Bowang District,Maanshan City,Anhui Provence,China.

Contact Us

    Tel: +86 0555 6776 471

    Email: info@ahhisman.com

    Fax: +86 0555 6765 075

    Phone: +86 138 5551 1880

    Add: A-8#, Dahe Industrial Park, Bowang Town, Bowang District, Maanshan City, Anhui Province, China

INQUIRY

Copyright © Anhui Hisman Intelligent Equipment Manufacture Co., Ltd. All Rights Reserved | Sitemap | Powered by Reanod